$1,249.00
In Stock


Calculate Shipping

This package allows fitment of the Carbon Winch to your PX 1 or 2 Ford Ranger in behind the bumper bar. The install requires very little modification, making it a mostly bolt on affair. Some cutting of the front bumper may be required for the fairlead. The cradle also works with MK2 XLT and Wildtrak Tech Pack Vehicles. (Please see notes below for PX2 Specific fitting info) 

 The winch cradle has the following features: 

  • Specifically designed for the Ford Ranger T6.
  • Bolts directly to vehicle chassis with supplied hardware.
  • Fitted behind the original factory bumper, the winch plate and winch is hidden.
  • Allows access to the winch free spool lever.
  • Manufactured from 8mm Carbon Steel for strength and black powder coated for added durability.
  • A small section of the original bumper needs to be trimmed to allow for the roller fairlead to be exposed.
  • There are no ADRs applicable to in bumper winch mounts. These cradles allow for proper function of airbags as per factory. The Manufacturer states: "The winch cradle is not designed or fitted in any way that will affect the crumple zones or airbag sensors of the car. The manufacturer has not conducted crash testing with this product, therefore they do not come with an airbag compatibility certificate. Fitment of this product is therefore conducted at your own risk."

Access to the clutch handle and control box is very limited in this setup. You may need to wire up in cab control for the winch or purchase a seperate winch control box plug and mount it externally on your bumper. to use the supplied hand controller. The other option is to extend the cables and mount the control box in your engine bay.


​​Consists of:

  • 1 x Winch Plate 
  • Hardware Kit
  • Fitting Instructions
  • Materials used: Black powder coated 8mm mild steel
  • Product Dimensions:210mm (8.3") L x 971mm (38.2") W x  195mm (7.7") H
  • Weight:17.6Kg

PX2 Ranger and Tech Pack Equipped Vehicles. 

The following is required to get it nicely fitted. See image in gallery as well. 
 
  • Redrill the fairlead mounting holes about 20mm lower down so no cutting of the bumper is required. 
  • Slightly bend out the vertical plate on the motor side so it clears the end cap on the motor. 
  • A new bracket will be needed to be made up and bolted to the cradle for the radar unit on tech pack equipped vehicles. 
 
The unit is made to originally suit the PX1 Ranger. Front Runner the company that produces these cradles have not made a new one for the PX2 but with the mods above our customers have made it compatible. 

 

The Carbon Winch 12k is the perfect match for a Ford Ranger. Weighing in at only 23.45kg on the front of your vehicle it's light weight will not adversly affect the handling of your vehicle. 

Features of the winch: 

• Designed by KPD Industries for our harsh Aussie conditions
• Fully sealed to resist water, dirt and dust ingress into motor, drum and gearbox mechanisms. 
• 12000lb fast line pull 216:1 planetary gearset ratio
• 6.2HP series wound electric motor
• 3 position solenoid box mounting bracket
• Battery cut out switch kit included
• Wireless remote control unit with lanyard- FULLY SEALED RECIEVER UNIT
• Rotating ring gear clutch for easy low drag freespool
• Electroplated planetary gearsets for long life

NO FUSS WARRANTY -
• 5 year electrical warranty on motor / solenoid unit
• Limited lifetime gear train warranty 
• Supported nationwide from Melbourne. Fast support via phone or email.

 

Understanding the tech features of the winch will help you to decide if this winch is suitable for your requirements. From line speed to dimensions all specifications are important in helping you to understand what you are getting.

 

Carbon Winches 12K Winch is a 12000lb line pull winch and can meet the rugged demands of off-road and utility use in Australian conditions. It is designed to deliver the best value, reliability and service life for an entry level winch user. The main features include:


• 6.2 HP Series Wound motor
• 216:1 ratio 3 stage planetary gearbox
• Automatic brake in the motor housing drum plate – (No heat build up on drum)
• Rotating ring gear freespool clutch assembly which minimises freespool drag and completely eliminates clutch engagement issues.
• Power in and power out via a plug in hand remote or a wireless remote controller. Remote controller has auto off and failsafe operation features built in. The receiver is fully sealed and impervious to water.
• 500amp sealed solenoid unit with a 3 position mounting bracket allowing you to mount the control box over the motor, over the drum or remote mounted on the bull bar.
Handle remote control and wireless remote control


SPECIFICATIONS
Part number: CW-12K
Rated line pull: 12000 lbs, (5450 kg) single-line
Motor: 12V DC 6.2HP series wound motor
Remote Control: Remote Switch, 12’ (3.7m) lead.
Wireless Remote Control: Included
Geartrain: 3-Stage Planetary.
Gear Ratio: 216:1
Clutch (freespooling): Rotating Ring Gear
Brake: Full load automatic brake installed in the motor housing end plate. No heat on drum.
Drum Diameter/Length: 2.5’’/8.8’’ (64mm/224mm)
Synthetic Rope: 24m x 10mm diameter
Fairlead: CNC billet alloy black anodised with laser etched logo
Recommended Battery: 650 CCA minimum for winching
Mounting Bolt Pattern: 10’’ x 4.5’’ ( 254mm x 114.3 )
Winch Dimensions ( L x W x H ): 21.7'' x 6.3'' x 6.8'' (552 x 160 x 172mm )
Packing Dimensions( L x W x H ): 24.2x 14.5' x 9.8' ( 615 x 370 x 250mm )
Winch weight with synthetic rope attached: 19.5kg


Winch weight including synthetic rope, control box complete with cables, mounting bolts & fairlead: 23.45kg

 

12V DC performance specs (first layer of drum)

Line Pull
Lbs.(Kgs.)

Line Speed
FT./min(M/min.)

Motor
Current

Pull by layer
layer/Lbs(Kgs.)

0

43.3(13.2)

70 amps

1/12,000 (5450)

2000 (910)

11.5 (3.5)

130 amps

2/9800 (4450)

4000 (1810)

9.2(2.8)

170amps

3/8300 (3770)

6000 (2720)

7.9 (2.4)

220amps

4/7200 (3270)

8000 (3630)

6.9 (2.1)

265 amps

 

10000 (4540)

5.6 (1.7)

320 amps

 

12000 (5450)

4.6 (1.4)

390 amps

 

Carbon Winch 12k – Package contents included in purchase price

Description

Quantity

Comment

Carbon Winch CW-12K

1

24x10mm Synthetic Dyneema Rope

Control box 500amp

1

1pc 500A solenoid and battery cables + wireless remote

1 x long black battery cable

Hand remote control –

 

Plug in

CNC Billet Black Plate Hawse Fairlead

 

Laser Etched Carbon Winches Fairlead

Hardware bag

6sets

4 pieces for mounting winch and 2 pieces for mounting fairlead on separate fairlead mount. 2 x extra long winch mounting bolts for mounting fairlead to winch mounts.

Owners Manual

1pc

 

Carbon Winch Hook

1pc

 

Red Hook strap

1pc

 

Battery cut out switch kit

1pc

Included

 

(CW-12K_WPFR001)

SKU CW-12K_WPFR001
Brand Carbon Winches Australia
Shipping Weight 47.0000kg
Shipping Width 47.000m

Be The First To Review This Product!

Help other Carbon Winches Australia users shop smarter by writing reviews for products you have purchased.

Write a product review